HTVista Setup Protocol

Please ensure that the device is activated and registered to the specific clinic before the installation takes place.

1. Place the device in a clean and accessible location (usually in the clinic’s front room). Ensure that the area’s network connection is stable.
   
   
2. Plug in the power and scanner cables. Take note of the red dots that indicate that you’ve connected the scanner cable correctly; you should hear a click that indicates it is connected.
   
   
3. Ensure that the scanner is correctly placed on the dock to perform calibration; you should see the dock’s black stripe on top.
   
   
4. Press the power button at the bottom of the console once.
   
   
5. Connect to WiFi.
   
   
6. Sign in to access the system; Username: htvista Password: htvista
   
   
7. When using the device for the first time, ensure that the veterinarian reads, signs, and accepts the terms and conditions.
   
   
8. Navigate to Settings > Support > Update version and click on Yes. The device will restart itself as soon as the update is completed.
   
   
9. Navigate to Settings > System Check and press Perform system check. Ensure that all the tests are successfully completed.
   
   
10. Click on the plus (+) icon to create a new patient. Under Patient’s Name and Patient’s ID fill in setup then complete the other required fields randomly and click Add.
    
    
11. Click on Scan new mass and press on any area of the dog’s body.
    
    
12. Place the scanner on the colored side of the user manual and press the scanner button for 3 seconds to start the scan. Ensure that the scan has started and completed properly.
    
    
13. Prepare a timer and randomly mark the suspected mass and healthy areas. Press Analyze and immediately turn the timer on.
    When the results are ready, a pop-up should appear at the right top corner. Measure the time it takes for the results to come back. If it takes longer than 5 minutes, check your network connection. The returned result should be HDI 5.
    
    
14. Check that the result was sent to the clinic’s email address.